TOOLS and ATTACHMENTS resources data table
Below you find a table collecting and comparing TOOLS and ATTACHMENTS of Mobile Industrial Machine and its suitability for Unmanned Ground Vehicle for Forest Clearing.
You can search by column or the entire table (using the box in the top right of the table), or make individual column searches by inputing text in the box above each collumn (this search is only applied when you press ENTER).
This is a community effort, so your help in keeping this information up to date is important. Please check theContributors Manual to see how you can help.
The following applies to the entire table:
| Project | PTO position Grade(1_5) | PTO position description | PTO power Grade(1_5) | PTO power description | Compliance with standards sensors Grade(1_5) | Compliance with standards description | Max Weight Grade(1_5) | Max Weight (kg) | Overall evaluation |
|---|---|---|---|---|---|---|---|---|---|
| Raptor 100 | 4 | - | 4 | - | 5 | - | 4 | Max. 800 kg | 4.25 |
| AgXeed AgBot | 4.5 | - | 4.75 | 100kW and 700V | 4.5 | Three-point front linkage cat 2, 3t Three-point rear linkage cat 3, 8t | 3 | Max. 400 kg | 4.55 |
| Bergmann M201 | 4 | Front | 4 | Hydraulic PTO | 5 | - | 4 | Max. 815 kg | 4.25 |
| Bobcat T7X | 2 | - | 2 | - | 3 | - | 3 | - | 2.50 |
| Case IH Concept | 4 | - | 5 | - | 5 | - | 3 | - | 4.25 |
| Energreen Robomax | 4 | - | 4 | - | 5 | - | 4 | - | 4.25 |
| Fendt 500 Vario | 4 | Rear | 5 | Engine PTO (540/540E/1000rpm);Front PTO (540 or 1000rpm) | 5 | (DCUP = double-acting couple under pressure; CUP = couple under pressure) | 3 | - | 4.25 |
| Green Climber LV600 | 4 | - | 4 | - | 5 | - | 3 | - | 4.00 |
| Hicon HİDROMEK | 2 | - | 3 | - | 3 | - | 3 | - | 2.75 |
| H&H Thermite RS1 | 2 | - | 3 | - | 3 | - | 2 | - | 2.50 |
| Jonh Deere 8R | 4 | Rear | 5 | Engine PTO rear (540/1000rpm) | 4.75 | 3-POINT HITCH - REAR | 4 | - | 4.44 |
| Kovaco Elise900 | 2 | - | 2 | - | 3 | Quick coupler – SAE J2513 | 3 | - | 2.50 |
| Kubota X tractor | 4 | - | 5 | - | 5 | - | 4.5 | - | 4.63 |
| LTU & TFP | 4 | - | 4 | - | 5 | - | 4 | - | 4.25 |
| M Fergunson Next | 4 | - | 5 | - | 5 | - | 4.5 | - | 4.63 |
| McConnel ROBOCUT | 4 | - | 4 | - | 5 | - | 4 | - | 4.25 |
| Milrem Multiscope | 4 | - | 2 | - | 3 | - | 3 | - | 3.00 |
| Monarch MK-V | 4 | Rear | 4 | Rear electric driven 30kw 540rpm | 5 | - | 4 | - | 4.25 |
| New Holland NHDrive | 4 | - | 5 | - | 5 | - | 4 | - | 4.50 |
| Shark-Robotics Colossus | 2 | - | 2 | - | 3 | - | 2 | - | 2.25 |
| RakkaTec Rakka 3000 | 4 | - | 4 | - | 5 | - | 4 | - | 4.25 |
| Volvo LX03 | 2 | - | 3 | Permanent magnet Hydraulics Motor 32kw | 3 | - | 3 | - | 2.75 |
| Yanmar YT01 | 4 | - | 5 | - | 5 | - | 4 | - | 4.50 |
| Zyelektrikli | 4 | Rear | 5 | 160hp electric driven | 5 | - | 3.75 | - | 4.44 |